The Barcelona metro implements smart ventilation control to prevent infection

30/06/2020 (Spain)

This summer, Transports Metropolitans de Barcelona (TMB) will implement an innovative pilot test of smart ventilation regulation in the metro network to improve environmental quality, hygiene and passenger comfort in stations. The digitization project has been developed in concert with SENER Engineering, which supplied its RESPIRA® control system. This project follows up on previous work carried out on line 1 to verify the importance of dynamic ventilation control, and which managed to lower the ambient temperature.

RESPIRA® is an artificial intelligence platform that is capable of lowering the heat index of passengers and metro workers by defining several criteria and reading parameters in real time, such as the temperature, humidity and indoor air quality in the stations and electricity consumption. These data are used by a dynamic algorithm to predict the environmental conditions inside stations (depending on the weather forecast, expected ridership levels and other factors) and then apply a mode of operation to each fan with the goal of improving the heat index while also minimizing electricity consumption.

The conventional lines of the Barcelona (1 to 5), which transport 94% of all riders, will be used to test this advanced ventilation regulation model starting in July. Metro de Barcelona is currently carrying out some preliminary work, namely: adapting the control and regulation programs of the entire conventional ventilation network (187 station fans and 142 tunnel fans), developing new features for controlling fixed installations remotely, and equipping part of the network with temperature and humidity sensors.

For the director of the metro network, Ramon Bacardí, this is a "good example of applying technology to improve service quality and have a direct effect on the customer's travel experience." He also noted "the contribution of the ventilation system to provide a safe and comfortable environment for the metro network at a time when passenger volume is rising once more. Also, for reasons of sustainability and social equality, we need for public transport to be seen again as the best option for metropolitan mobility in the Barcelona area."

The Director of Innovation at SENER, Òscar Julià, says that "RESPIRA® is one of the many digitization initiatives that the company is currently working on. For SENER, the digital transformation involves integrating new technologies into businesses from the start, the ultimate goal being to make them available to society through innovations that improve people's lives and are sustainable and environmentally friendly." He added, "In the current context, RESPIRA® can also play a very important role in improving the health and comfort of hundreds of thousands of riders who use the metro annually as a way to reach their destination."

Against the spread of COVID-19

Smart ventilation control will maximize the amount of fresh air from the outside, a measure that will allow for increased hygiene inside the metro network and reduce the risk of spreading the coronavirus, which is responsible for COVID-19, and other microorganisms, in keeping with guidelines from health authorities. The enhanced environmental conditions in the stations in terms of temperature and humidity will be noticeable in the form of improved comfort for both passengers and employees.

Currently, this test project in the Barcelona metro is being studied by the Spanish Ministry of Science and Innovation as a solution that can be extrapolated to other large infrastructures.

The project also offers a series of advantages to the operator, such as equipment availability, rapid detection of abnormal operations, improved maintenance, lower electricity consumption, maximum performance of the installation and help in determining those areas where new investments are justified from a cost/benefit ratio perspective, thus contributing to the efficient and sustainable management of assets.

Comprehensive engineering study of Line 1

TMB and SENER previously collaborated on a pioneering and comprehensive engineering study of the ventilation in line 1 of the Barcelona Metro. For the first time in an operational transportation network, the infrastructure, trains and equipment were mathematically modeled and all possible operating modes of the ventilation and the existing infrastructure were studied analytically. As a result, in March 2019, the ventilation setpoints were changed, yielding a 1.2º C reduction in equivalent days compared to the previous year in the hottest stations on the line.

The new ventilation regime, implemented on the five conventional lines, involves exhausting air through the ventilation shafts in the tunnels and channeling it through the station fans and access points, maintaining the same air flow throughout the year. The key element is to take advantage of low temperatures in winter and nighttime periods to gradually lower the average temperature in the tunnels. This strategy has already allowed a first step to be taken in increasing the amount of fresh air from the street in passenger areas as a way to prevent COVID-19.

Reducing the temperature was one of the objectives pursued. But the study also demonstrated the importance of properly operating the ventilation equipment and hinted at the possibilities of a smart and dynamic control method that takes into account the ambient conditions outside and inside the stations to provide for an optimized ventilation strategy by sending individual setpoints to the fans, based on the time and day. This opened the doors to the digital transformation of one of the basic systems of the Barcelona metro infrastructure. 

Contact Up Up
Cookie configurator

A "cookie" is a small file that asks permission to be placed on your devices. Once the user has accepted, the file is added and helps analyze web traffic or allows you to detect when that user visits a particular Website.

Current law allows us to store cookies on your device, if these are strictly necessary for the operation of our web page, based on the legitimate interest of SENER GRUPO DE INGENIERÍA. Thus, for the rest of the cookies we need your consent, so below we inform you of the different types of cookies that we use in our Website.

Cookie settings Accept all and continue browsing
Your choice regarding cookies on this site

This website uses cookies and / or similar technologies that store and retrieve information when you browse. In general, these technologies can serve very diverse purposes, such as, for example, recognizing you as a user, obtaining information about your browsing habits, or customizing the way the content is displayed. The specific uses we make of these technologies are described below.

  • Necessary cookies

    Technical or necessary cookies: those strictly necessary for the correct functionality of SENER GRUPO DE INGENIERÍA’s Website. They cannot be deactivated as, without them, certain parts of the web may not be available.


    Show / hide full list
    Owner Name Purpose Type Length - HTTP 1 year CWNWSESSION - HTTP Session CWNWSESSION - HTTP Session
  • Statistical cookies

    Analysis and statistical cookies: they help to understand how visitors interact with the Website, by gathering and providing information in an anonymous way, such as visits and views on the Website. In addition, they allow us to identify technical problems and find ways to optimize it.


    Show / hide full list
    Owner Name Purpose Type Length _at.hist.# - HTML Persistent
    _ga - HTTP 2 years
    _gat - HTTP 1 day
    _gid - HTTP 1 day
    _pk_id# - HTTP 1 year
    _pk_ses# - HTTPS 1 day collect - Pixel Session piwik.php - Pixel Session
  • Marketing cookies

    Marketing cookies: these are used to personalise SENER GRUPO DE INGENIERÍA’s Website and online store, showing personalised product recommendations or information to the user on this or other web sites.

    Show / hide full list
    Owner Name Purpose Type Length __atuvc - HTTP 1 year
    __atuvs - HTTP 1 day
    _at.cww - HTML Persistent
    at-lojson-cache-# - HTML Persistent
    at-rand - HTML Persistent bcookie - HTTP 2 years
    bscookie - HTTP 2 years
    lidc - HTTP 1 day
    lissc - HTTP 1 year GPS - HTTP 1 day
    VISITOR_INFO1_LIVE - HTTP 179 days
    YSC - HTTP Session
    yt-remote-cast-installed - HTML Session
    yt-remote-connected-devices - HTML Persistent
    yt-remote-fast-check-period - HTML Session
    yt-remote-session-app - HTML Session
    yt-remote-session-name - HTML Session IDE - HTTP 1 year
    test_cookie - HTTP 1 day uvc - HTTP 1 year
    xtc - HTTP 1 year
Go back Zapisz ustawienia